LB2000 Ultrasonic Displacement Sensor with NPN/PNP Switching Output
Product Description
LB2000 Ultrasonic Displacement Sensor with Switching Output
The MANORSHI LB2000 series is an ultrasonic displacement sensor with a detection range of 100–2000 mm. It provides NPN or PNP switching output options for object presence detection and position monitoring.
The series supports teach-in configuration, allowing switching points to be set using a target. Built-in temperature drift compensation supports measurement consistency, while red and green LEDs indicate target detection and teach-in status. The sensor features IP67 protection and a 5-pin M12 connector.
Features
Built-in temperature drift compensation
Configurable switching points through teach-in
Single or dual NPN/PNP output options
Synchronization and teach-in input functions
Protected housing for industrial installation
Applications
The available switching functions support:
Object presence detection
Position monitoring at a configured switching point
Target detection within a defined distance window
Specifications
Parameter |
Specification |
|---|---|
Detection Range |
100–2000 mm |
Blind Zone |
0–100 mm |
Resolution |
0.17 mm |
Repeatability |
±0.15% of full scale |
Absolute Accuracy |
±1%, with built-in temperature drift compensation |
Response Time |
82 ms |
Switching Frequency |
10 Hz |
Power-on Delay |
<500 ms |
Operating Voltage |
10–30 V DC |
Reverse Polarity Protection |
Supported |
No-load Current |
<30 mA |
Input Functions |
Synchronization and teach-in |
Protection Rating |
IP67 |
Connection |
5-pin M12 connector |
Ambient Temperature |
−25°C to +70°C |
Storage Temperature |
−40°C to +85°C |
Materials |
Nickel-plated brass, plastic parts and glass-filled epoxy resin |
Weight |
105 g |
Output Options and Model Selection
Output Configuration |
Models |
|---|---|
Single NPN switching output, NO/NC |
LB2000-30GM60-E2-V15; LB2000-30GM60-E4-V15 |
Single PNP switching output, NO/NC |
LB2000-30GM60-E3-V15; LB2000-30GM60-E5-V15 |
Dual PNP switching outputs, NO/NC |
LB2000-30GM60-E6-V15; LB2000-30GM60-E8-V15 |
Dual NPN switching outputs, NO/NC |
LB2000-30GM60-E7-V15; LB2000-30GM60-E9-V15 |
FAQs
What is the detection range of the LB2000?
The detection range is 100–2000 mm. The blind zone is 0–100 mm.
Does the LB2000 provide an analog output?
The LB2000 models listed on this page provide switching outputs. Select the model according to the required NPN or PNP output and switching functions.
What is required for synchronized operation?
The datasheet specifies that a synchronization controller is required for synchronous or asynchronous operation with sensors of the same or different models.