norr@manorshi.com        +86-519-89185720
1

Soil Sensor

All Products

Image Product Name Dimension Rated Voltage Current Operating Voltage Measure Range Response time
MNS-TR-P2 SOIL SENSOR MNS-TR-P2 SOIL SENSOR 270*70mm 5-24V DC 5-24V DC 10-100cm horizontal installation
MNS-TR-P4 SOIL SENSOR MNS-TR-P4 SOIL SENSOR 126*45mm 24VDC 5-24V DC 10-100cm horizontal installation
MNS-TR-P4 SOIL SENSOR MODULE MNS-TR-P4 SOIL SENSOR MODULE 131*68mm 12VDC 5-24V DC 5-24V DC 10-100cm horizontal installation

Soil Sensor Manufacturer and Supplier

MANORSHI is a soil sensor manufacturer and supplier specializing in multi-parameter soil monitoring sensors and sensor modules for agriculture, smart irrigation, greenhouse management and agricultural IoT applications.

Our soil sensor product range includes 3-in-1 integrated soil sensors, multi-parameter soil sensors and soil sensor modules. Depending on the model and configuration, the available measurement parameters include soil moisture, temperature, electrical conductivity (EC), pH, salinity and nitrogen, phosphorus and potassium (NPK).

MANORSHI offers the MNS-TR-P2, MNS-TR-P4 and MNS-TR-P4M soil sensor models. These products feature different dimensions, electrical configurations and installation requirements for integration into agricultural monitoring equipment and soil measurement systems.

Our soil sensors can be evaluated for agricultural land monitoring, greenhouse cultivation, irrigation management, soil nutrient monitoring, environmental monitoring and precision agriculture. Selected configurations support RS485 or SDI-12 communication for connection to compatible data acquisition and control systems.

MANORSHI supplies soil monitoring components for agricultural equipment manufacturers, irrigation system integrators, greenhouse equipment suppliers, agricultural IoT developers and electronic sensor distributors. Product datasheets, technical drawings and samples can be requested for engineering evaluation.

Request a Soil Sensor QuoteRequest Technical Datasheets

MANORSHI Soil Sensor Product Range

MANORSHI offers three soil sensor products for different agricultural measurement and equipment integration requirements. The range includes an integrated 3-in-1 soil sensor, a multi-parameter soil sensor and a dedicated soil sensor module.

Model Product Type Dimensions Voltage Information Listed Measuring Distance Installation
MNS-TR-P2 3-in-1 Soil Sensor 270 × 70mm 5–24V DC 10–100cm Horizontal installation
MNS-TR-P4 Multi-Parameter Soil Sensor 126 × 45mm 24V DC rated; 5–24V DC listed operating range 10–100cm Horizontal installation
MNS-TR-P4M 8-in-1 Soil Sensor Module 131 × 68mm 12V DC rated; 5–24V DC listed operating range 10–100cm Horizontal installation

The dimensions, voltage information and installation methods above are based on the published MANORSHI product listings. The listed 10–100cm measuring distance should be confirmed against the latest technical drawings to establish its exact measurement definition and application conditions.

The MNS-TR-P4 and MNS-TR-P4M product information includes different voltage descriptions. Confirm the exact rated voltage, permitted operating range, current consumption and wiring configuration for the selected version before connecting it to an external controller.

MNS-TR-P2 – 3-in-1 Integrated Soil Sensor

The MNS-TR-P2 is a 3-in-1 integrated soil sensor designed for agricultural soil monitoring. Its product description identifies salinity, pH and NPK-related soil measurement functions in an integrated sensor design.

With dimensions of 270 × 70mm and a listed 5–24V DC operating voltage, the MNS-TR-P2 can be evaluated for agricultural monitoring equipment, soil analysis systems and integrated soil measurement applications.

Customers should confirm the exact three measurement channels, output interface, measurement ranges and calibration specifications for the selected version before ordering.

View MNS-TR-P2 Product Details >

MNS-TR-P4 – Multi-Parameter Soil Sensor

The MNS-TR-P4 is a multi-parameter soil sensor for agricultural measurement applications. Its supplier product information identifies soil moisture, temperature, electrical conductivity, pH, salinity and NPK measurement configurations.

The sensor measures 126 × 45mm and is listed with RS485 or SDI-12 communication options. The published measurement information includes soil moisture, temperature, EC, pH and nutrient-related parameters. Confirm the exact sensor configuration and available output interface for the required version.

For integration projects, engineers should request the communication protocol, register map, measurement units, calibration information and electrical wiring diagram before connecting the sensor to a PLC, data logger or agricultural IoT gateway.

View MNS-TR-P4 Product Details >

MNS-TR-P4M – 8-in-1 Soil Sensor Module

The MNS-TR-P4M is an integrated soil sensor module designed for multi-parameter agricultural monitoring equipment. Its product listing identifies an 8-in-1 soil measurement configuration.

With dimensions of 131 × 68mm, the module can be evaluated for integration into soil monitoring instruments, smart irrigation controllers and agricultural IoT equipment. Its listed rated voltage is 12V DC, with a 5–24V DC operating range.

Before system integration, confirm the eight measurement parameters, communication protocol, output format, register mapping, power requirements and mechanical mounting details for the selected module version.

View MNS-TR-P4M Product Details >

Compare Soil Sensor Models

What Is a Soil Sensor?

A soil sensor is an electronic measurement device designed to monitor physical and chemical conditions in soil. Depending on its sensing elements and configuration, it can measure soil moisture, temperature, electrical conductivity, pH, salinity and nutrient-related parameters.

Soil sensors are used in precision agriculture, greenhouse management, smart irrigation, agricultural research and environmental monitoring. Their measurement data can help growers and equipment operators evaluate soil conditions and make more informed irrigation and fertilization decisions.

A multi-parameter soil sensor combines several measurement functions in one probe or module. Instead of installing separate devices for each soil parameter, users can collect multiple readings through an integrated measurement system, depending on the selected model.

Soil Moisture Sensor

A soil moisture sensor measures the water content in soil. It is commonly used in irrigation systems, greenhouse cultivation, agricultural research and plant growth monitoring.

Moisture measurements may be expressed as volumetric water content (VWC), gravimetric water content (GWC) or a relative moisture value. The unit and calibration method should be clearly identified before comparing readings from different sensors.

Soil Temperature Sensor

A soil temperature sensor measures the temperature of the soil surrounding the probe. Temperature information is useful for monitoring root-zone conditions, seed germination environments and agricultural growing conditions.

Soil Electrical Conductivity Sensor

Soil electrical conductivity (EC) measures the ability of soil to conduct electrical current. It is influenced by dissolved ions, moisture content, soil texture and temperature.

EC measurements are used to evaluate soil salinity conditions and support agricultural soil management. The reported value should be interpreted according to the sensor's measurement method and calibration conditions.

Soil pH Sensor

A soil pH sensor measures the acidity or alkalinity of a soil sample or soil environment. Soil pH influences nutrient availability and affects the suitability of soil for different crops.

The pH measurement range, electrode design, calibration solution and maintenance requirements should be checked before selecting a sensor for long-term field monitoring.

Soil Salinity Sensor

Soil salinity measurement helps evaluate the concentration of dissolved salts in the soil. Excessive salinity can affect water uptake by plant roots and influence crop growth.

Salinity and electrical conductivity are related measurements, but they are not automatically interchangeable. The conversion method depends on the soil solution, calibration and measurement system.

Soil NPK Sensor

An NPK soil sensor provides measurements or estimates related to nitrogen (N), phosphorus (P) and potassium (K), three important nutrients for plant growth.

NPK data can support agricultural nutrient monitoring and fertilization management. Electronic sensor readings should be interpreted according to the measurement technology, calibration and soil conditions. They should not automatically be treated as equivalent to laboratory soil analysis.

Soil Moisture, Temperature and Nutrient Measurement

A multi-parameter soil sensor provides information about different soil conditions through an integrated probe or module. The available measurement channels depend on the product configuration.

Measurement Parameter Unit Agricultural Application
Soil Moisture % / m³/m³ Irrigation management and water content monitoring
Soil Temperature °C Root-zone and growing environment monitoring
Electrical Conductivity μS/cm or mS/cm Soil conductivity and salinity evaluation
Soil pH pH Soil acidity and alkalinity monitoring
Salinity μS/cm or other specified units Soil salt condition monitoring
Nitrogen (N) mg/kg Nitrogen-related nutrient monitoring
Phosphorus (P) mg/kg Phosphorus-related nutrient monitoring
Potassium (K) mg/kg Potassium-related nutrient monitoring

Not every soil sensor measures all eight parameters. Confirm the exact measurement channels, ranges, accuracy, resolution and units of the selected model before ordering.

3-in-1 Soil Sensor and 8-in-1 Soil Sensor

Integrated soil sensors combine multiple measurement functions in a single probe or module. The number of measurement parameters and available communication interfaces depend on the product design.

3-in-1 Soil Sensor

A 3-in-1 soil sensor combines three soil measurement functions in one integrated device. The MANORSHI MNS-TR-P2 product description identifies salinity, pH and NPK-related measurement functions.

This configuration can be evaluated for agricultural monitoring equipment and integrated soil analysis systems requiring multiple soil parameters from a single sensor assembly.

8-in-1 Multi-Parameter Soil Sensor Module

An 8-in-1 soil sensor module combines multiple measurement channels in a single electronic measurement system. The MANORSHI MNS-TR-P4M is listed as an 8-in-1 soil sensor module.

Multi-parameter measurement configurations can include soil moisture, temperature, electrical conductivity, pH, salinity, nitrogen, phosphorus and potassium. Confirm the exact eight channels and their measurement specifications for the selected module version.

Advantages of Integrated Soil Measurement

  • Multiple soil parameters can be monitored through one integrated sensor assembly.

  • Simplifies equipment layout compared with installing multiple separate probes.

  • Supports centralized soil data collection.

  • Can reduce the number of sensor connections required in an integrated system.

  • Supports agricultural IoT and automated monitoring system development.

  • Allows different soil measurement channels to be evaluated together.

Soil Sensor vs. Soil Moisture Sensor

A soil moisture sensor specifically measures soil water content, while a multi-parameter soil sensor can measure several physical and chemical soil properties. The correct product depends on the number of parameters required by the agricultural monitoring system.

Comparison Soil Moisture Sensor Multi-Parameter Soil Sensor
Main Function Measures soil water content Measures multiple soil properties
Measurement Channels Primarily soil moisture Moisture, temperature, EC, pH, salinity and NPK, depending on configuration
Typical Output Analog or digital signal RS485, SDI-12 or other supported interfaces
Typical Applications Irrigation and moisture monitoring Precision agriculture and soil analysis systems
System Integration Simple moisture monitoring circuits Multi-channel data acquisition and IoT systems

A soil moisture sensor is suitable when irrigation decisions primarily depend on water content. A multi-parameter soil sensor is more suitable when the system also needs information about temperature, salinity, pH or nutrient-related parameters.

How Does a Soil Sensor Work?

A soil sensor uses one or more sensing elements to detect physical or chemical properties of the soil. The sensing elements convert changes in soil conditions into electrical signals that can be processed and transmitted to an external monitoring or control system.

1. Soil Contact and Measurement

The probe or sensing element is positioned in the soil according to the recommended installation method. It detects the relevant soil properties within its measurement area.

2. Electrical Signal Conversion

Changes in soil moisture, temperature, electrical conductivity or other measured parameters are converted into electrical signals through the sensor's internal sensing and signal conditioning circuits.

3. Signal Processing

The internal electronic circuit processes the sensor signals and converts them into measurement values according to the product configuration and calibration settings.

4. Data Output and Communication

The sensor sends measurement data through its supported electrical interface. Depending on the model, this may include RS485, SDI-12 or another specified output format.

5. Monitoring and Control System Integration

The measurement data can be collected by a compatible PLC, data logger, agricultural controller or IoT gateway. The host system can display soil conditions, record historical readings and support irrigation or agricultural management decisions.

Applications of Soil Sensors

Soil sensors are used in agricultural production, greenhouse management, irrigation systems and environmental monitoring. Multi-parameter configurations provide additional soil information for applications requiring more than basic moisture measurement.

Precision Agriculture

Precision agriculture uses soil measurement data to understand variations in field conditions. Soil moisture, temperature, EC, pH and nutrient-related information can help agricultural operators evaluate different growing areas and plan irrigation and fertilization strategies.

Smart Irrigation Systems

Smart irrigation systems use soil moisture measurements to support watering schedules and irrigation control. A compatible soil sensor can transmit moisture data to an irrigation controller or agricultural monitoring platform.

When soil moisture data is combined with weather information and crop requirements, the system can support more informed irrigation decisions and help reduce unnecessary water application.

Greenhouse Monitoring

Greenhouses require continuous monitoring of growing media and root-zone conditions. Soil sensors can be integrated into greenhouse controllers to collect moisture, temperature and other available soil parameters.

Hydroponics and Soilless Cultivation

Soilless cultivation systems use growing substrates such as coco coir, perlite and mineral wool. Compatible moisture and EC sensors can support monitoring of water content and nutrient solution conditions within the growing medium.

Agricultural Research and Soil Analysis

Research farms and agricultural laboratories use soil sensors to collect repeated measurements across different locations and depths. Multi-parameter data can support soil condition studies, irrigation experiments and nutrient management research.

Plantations, Orchards and Nurseries

Plantations, orchards and nurseries can use soil sensors to monitor root-zone moisture and other soil conditions. Sensor placement should reflect crop type, soil texture, root distribution and irrigation method.

Environmental and Land Monitoring

Soil sensors can also be integrated into environmental monitoring stations for observing moisture, temperature and other soil conditions over time. Multiple sensors can provide data for agricultural land assessment and environmental research.

Soil Sensor Communication and System Integration

Communication interfaces determine how soil sensor data is transferred to external controllers, data loggers and agricultural IoT systems. The selected interface should be compatible with the receiving device and the required data acquisition architecture.

RS485 Communication

RS485 is a differential serial communication interface widely used in industrial sensors and agricultural monitoring equipment. It supports communication between sensors and compatible controllers over suitable cable installations.

The MNS-TR-P4 supplier product information identifies RS485 as an available output interface. Customers should request the exact communication protocol, baud rate, device address and register map for the selected version.

SDI-12 Communication

SDI-12 is a serial communication protocol used in environmental and agricultural data acquisition systems. It allows compatible sensors to communicate with data loggers and monitoring equipment using a standardized interface.

Confirm SDI-12 support for the selected sensor version before designing the logger connection and data acquisition system.

Modbus RTU Integration

Modbus RTU is a communication protocol commonly used with RS485 interfaces. It allows a controller or data logger to read measurement registers from a compatible soil sensor.

For Modbus integration, engineers need the register map, slave address, baud rate, data format, scaling factors and measurement update interval.

Agricultural IoT and Wireless Integration

Soil sensors can be connected to agricultural IoT gateways and wireless monitoring platforms through compatible controllers or communication modules. Depending on the system architecture, data can be transferred through LoRaWAN, cellular networks, Wi-Fi or other wireless technologies.

The wireless communication method must be confirmed for the selected MNS-TR-P4M module configuration. Do not assume that every soil sensor module includes a wireless transmitter or gateway function.

PLC and Data Logger Integration

Soil sensors can be integrated with compatible PLCs, data loggers and industrial monitoring controllers. Engineers should verify supply voltage, signal wiring, communication protocol and data scaling before connecting the sensor to the host system.

How to Select the Right Soil Sensor

Selecting a suitable soil sensor requires matching the measurement parameters, electrical interface, installation method and environmental conditions to the agricultural application.

1. Identify the Required Soil Parameters

Determine whether the application requires soil moisture only or multiple parameters such as temperature, EC, pH, salinity and NPK. Choose an integrated sensor according to the exact measurement channels required by the monitoring system.

2. Select the Appropriate Sensor Configuration

A 3-in-1 integrated sensor may be suitable for a project requiring a smaller group of soil parameters. An 8-in-1 soil sensor module can be considered when the system requires more measurement channels within one integrated assembly.

3. Confirm Measurement Range and Accuracy

Check the measurement range, accuracy and resolution for each parameter. Soil moisture, temperature, EC, pH and NPK require different measurement units and calibration methods.

4. Check Supply Voltage and Power Consumption

Confirm the rated voltage, permitted operating voltage and maximum current consumption. Ensure that the power supply is compatible with the agricultural controller, data logger or external power system.

5. Choose the Correct Communication Interface

Determine whether the host system requires RS485, Modbus RTU, SDI-12 or another communication interface. Confirm the protocol version, register mapping, wiring and communication settings before purchasing.

6. Evaluate Installation Dimensions and Probe Structure

Check the sensor dimensions, probe length, installation direction and required insertion depth. Ensure that the sensor can be installed in the intended soil environment without damaging the probe or surrounding structure.

7. Consider Soil Type and Calibration

Soil texture, density, salinity and temperature can influence measurement results. Confirm the calibration conditions and whether soil-specific calibration is required for the intended application.

8. Check Environmental Protection

For outdoor agricultural installations, evaluate moisture exposure, soil contact, temperature variations, corrosion resistance and ingress protection. Request the actual IP rating and supporting test documentation rather than assuming the sensor is suitable for permanent burial.

9. Evaluate Long-Term Data Collection Requirements

For long-term agricultural monitoring, confirm measurement intervals, data output format, cable length, communication distance and compatibility with the data logger or IoT gateway.

10. Request Samples and Technical Documentation

Before mass production, request samples, datasheets, wiring diagrams and mechanical drawings. Test the sensor in the actual soil type and monitoring system to verify the measurement results and communication compatibility.

Soil Sensor Installation and Maintenance

Correct installation is important for reliable soil measurement. Sensor position, soil contact, installation depth and surrounding soil conditions can influence the measurement results.

Select a Representative Installation Location

Choose an installation location that represents the soil conditions of the target agricultural area. Consider crop type, root-zone depth, irrigation position, soil texture and local drainage conditions.

Follow the Recommended Installation Direction

Follow the installation direction specified for the selected model. MANORSHI's current product listings identify horizontal installation for the MNS-TR-P2, MNS-TR-P4 and MNS-TR-P4M. Confirm the exact mounting procedure using the approved product drawing.

Ensure Proper Soil Contact

Ensure that the sensing elements are installed with suitable contact with the surrounding soil. Large air gaps, loose soil and inconsistent installation depth may affect the measurement response.

Check Electrical Wiring and Communication

Connect the sensor according to the wiring diagram. Verify power supply polarity, signal connections, communication settings and the compatibility of the external data acquisition system.

Perform Calibration and Initial Testing

Check the initial sensor readings after installation and compare them with suitable reference measurements where available. Apply the recommended calibration procedure for the soil type and measurement parameters.

Inspect the Sensor Periodically

Inspect the sensor body, probe, cable and electrical connections according to the environmental conditions. Check for mechanical damage, corrosion, loose connections and unexpected changes in measurement readings.

Soil Sensor OEM and ODM Manufacturing

MANORSHI supplies soil sensors and sensor modules for agricultural equipment manufacturers, smart irrigation system integrators, greenhouse equipment suppliers, precision agriculture developers and agricultural IoT companies.

Our product range includes integrated soil sensors and multi-parameter sensor modules for different soil monitoring requirements. OEM and ODM project requirements can be evaluated according to the measurement channels, electrical interface, mechanical structure and intended application.

For OEM and ODM soil sensor projects, customers can provide the following information:

  • Required soil measurement parameters: moisture, temperature, EC, pH, salinity and NPK.

  • Required number of integrated measurement channels.

  • Measurement range, accuracy and resolution for each parameter.

  • Soil type and intended agricultural application.

  • Required supply voltage and current consumption.

  • Communication interface: RS485, Modbus RTU, SDI-12 or other requirements.

  • Register map and data format requirements.

  • Probe dimensions, installation direction and cable length.

  • Housing material and environmental protection requirements.

  • Data logger, PLC or agricultural IoT gateway information.

  • Sample quantity and estimated annual purchasing volume.

Customers can request available product datasheets, wiring diagrams, mechanical drawings and samples for engineering evaluation. Custom configurations, communication options, packaging and production requirements can be discussed according to project feasibility.

Minimum order quantity, customization availability and production lead time should be confirmed according to the selected model and project requirements.

Discuss Your Soil Sensor OEM Project

Frequently Asked Questions About Soil Sensors

1. What Is a Soil Sensor?

A soil sensor is an electronic measurement device used to monitor soil conditions. Depending on its configuration, it can measure soil moisture, temperature, electrical conductivity, pH, salinity and nutrient-related parameters such as nitrogen, phosphorus and potassium.

2. What Parameters Can a Multi-Parameter Soil Sensor Measure?

A multi-parameter soil sensor may measure moisture, temperature, EC, pH, salinity, nitrogen, phosphorus and potassium. The actual measurement channels depend on the selected model and configuration.

3. What Is the Difference Between a 3-in-1 and an 8-in-1 Soil Sensor?

A 3-in-1 soil sensor integrates three measurement functions into one device, while an 8-in-1 model combines eight soil measurement parameters. The correct choice depends on the number of measurement channels required by the agricultural monitoring system.

4. What Is the Difference Between Soil Moisture and Soil Water Content?

Soil moisture is a general term describing the water present in soil. Soil water content is a quantitative measurement that may be expressed as volumetric water content (VWC) or gravimetric water content (GWC). The measurement unit should be checked when comparing different sensors.

5. What Is VWC in Soil Moisture Measurement?

VWC stands for Volumetric Water Content. It represents the volume of water contained in a given volume of soil and is commonly expressed as m³/m³ or a percentage. It is widely used in agricultural irrigation and soil moisture monitoring systems.

6. What Is the Difference Between Soil EC and Soil Salinity?

Soil electrical conductivity measures the ability of soil or its solution to conduct electricity. Soil salinity refers to the concentration of dissolved salts. EC is often used as an indicator of salinity, but the conversion depends on soil conditions and calibration.

7. What Does NPK Mean in Soil Measurement?

NPK refers to nitrogen (N), phosphorus (P) and potassium (K), three major nutrients required for plant growth. NPK soil sensors provide measurement or estimation data related to these nutrients to support agricultural soil monitoring and nutrient management.

8. What Is the MNS-TR-P2 Soil Sensor Used For?

The MNS-TR-P2 is a 3-in-1 integrated soil sensor. Its product description identifies salinity, pH and NPK-related measurement functions. It is designed for agricultural soil monitoring and integrated soil measurement applications.

9. What Is the Difference Between MNS-TR-P4 and MNS-TR-P4M?

MNS-TR-P4 is listed as a multi-parameter soil sensor, while MNS-TR-P4M is listed as an 8-in-1 soil sensor module. Their dimensions and voltage information are different. Confirm the exact measurement channels, communication interface and installation requirements for the selected version.

10. What Is the Operating Voltage of MANORSHI Soil Sensors?

The product listings show 5–24V DC operating voltage information for the MNS-TR-P2, MNS-TR-P4 and MNS-TR-P4M. Their rated voltage descriptions differ. Refer to the latest model-specific electrical datasheet before selecting the power supply.

11. Do MANORSHI Soil Sensors Support RS485 Communication?

The MNS-TR-P4 supplier product information identifies RS485 as an available communication interface. Confirm the exact output version, communication protocol, baud rate and register map before integrating the sensor into a PLC or data logger.

12. What Is SDI-12 Communication in Soil Sensors?

SDI-12 is a serial digital communication protocol used by environmental and agricultural measurement systems. It allows compatible sensors to transmit measurement data to data loggers and monitoring equipment through a standardized interface.

13. Can Soil Sensors Be Connected to a PLC?

Yes, soil sensors with compatible output interfaces can be connected to PLCs and industrial data acquisition systems. The electrical interface, communication protocol, register mapping and power supply must match the host controller.

14. Can Soil Sensors Be Used in Smart Irrigation Systems?

Yes. Soil moisture measurements can be transmitted to an irrigation controller or agricultural IoT platform. The system can use soil water content information to support irrigation scheduling and monitoring according to crop requirements and local conditions.

15. Can Multi-Parameter Soil Sensors Be Used in Greenhouses?

Yes. Multi-parameter soil sensors can be used in greenhouse monitoring systems to collect moisture, temperature, EC and other available soil data. The selected sensor should be compatible with the growing substrate and monitoring equipment.

16. What Is the Installation Method of MANORSHI Soil Sensors?

The current MANORSHI product listings identify horizontal installation for the MNS-TR-P2, MNS-TR-P4 and MNS-TR-P4M. Follow the specific product drawing and installation instructions to ensure suitable soil contact and measurement conditions.

17. Are Soil Sensors Waterproof?

Waterproof performance depends on the sensor housing, sealing structure, cable entry and product version. Customers requiring permanent burial or outdoor installation should confirm the actual IP protection rating and environmental test documentation for the selected model.

18. Do Soil Sensors Require Calibration?

Calibration requirements depend on the sensing method, soil type and measured parameter. Soil moisture readings can be influenced by soil texture, density and salinity. pH and EC measurements also require suitable calibration procedures according to the sensor design.

19. What Is the Difference Between Soil Sensor Resolution and Accuracy?

Resolution describes the smallest measurement increment that a sensor can report. Accuracy describes how close the measurement is to the actual reference value. A sensor with high resolution does not necessarily have high measurement accuracy.

20. Does MANORSHI Provide Soil Sensor Samples and Technical Documentation?

Customers can contact MANORSHI to request available product datasheets, wiring diagrams, mechanical drawings and samples for selected soil sensor models. Providing the required measurement parameters and application information helps identify a suitable configuration.

21. Does MANORSHI Support OEM and ODM Soil Sensor Projects?

MANORSHI can evaluate OEM and ODM soil sensor requirements according to the selected product and project specifications. Customers can provide measurement parameters, electrical interfaces, installation dimensions and estimated purchasing quantities for assessment.

Contact MANORSHI for Soil Sensor Solutions

Looking for a soil sensor manufacturer for your agricultural monitoring equipment, smart irrigation system, greenhouse project or agricultural IoT application?

MANORSHI supplies integrated soil sensors and multi-parameter sensor modules for monitoring soil moisture, temperature, electrical conductivity, pH, salinity and nutrient-related parameters according to the selected model configuration.

Send us your required measurement channels, measurement ranges, power supply, communication interface, installation dimensions and estimated purchasing quantity. Our team can help evaluate suitable soil sensor models and provide available technical information for your project.

Contact MANORSHI for a Quotation

Contact Us

Tel: +86-519-89185720
E-mail:  norr@manorshi.com

Changzhou Factory
No. 61 Kunlun Road, Xinbei District, Changzhou, Jiangsu, China

Shenzhen Office
Room 1708, Unit B, Hetai Smart Building, Longhua District, Shenzhen, Guangdong, China