| Image | Product Name | Model | Dimension | Rated Voltage | Frequency | SPL | Current | Operating Voltage | Details |
|---|---|---|---|---|---|---|---|---|---|
![]() | 10mm DC 12v 105dB Piezo Buzzer | MSPT31A32W100V12CT | 30.6 * 16mm | 12VDC | 3250±500Hz | ≥105dB@10cm | ≤30mA | 6~16VDC | View detail » |
![]() | 10mm*3mm piezo transducer for telephone ringer with leads | MSPT10A32W90V10 | 10.0 * 3.2mm | 10Vp-p | 3200±500HZ | ≥80dB@10cm | ≤5mA | 1~30Vp-p | View detail » |
![]() | 12V 80db 4000KHz Self Drive Piezo Pin Buzzer | MSPT12A40P6.5V12 | 12.7 * 6.8mm | 12Vp-p | 4000±500HZ | ≥80dB@10cm | ≤2mA | 1~25Vp-p | View detail » |
![]() | 13mm*7mm piezo transducer for telephone ringer | MSPT13A40PA5V6 | 12.6 * 7.0mm | 6Vp-p | 4000±500HZ | ≥82dB@10cm | ≤2mA | 1~20Vp-p | View detail » |
![]() | 1325 Piezo Passive Buzzer Ultrathin Wire 5v 12V Buzzer | MSPT13B48W30V12 | 13.0 * 2.5mm | 12Vp-p | 4800±500HZ | ≥85dB@10cm | ≤2mA | 1~25Vp-p | View detail » |
![]() | 5v 12V Passive Eectrical Piezo Buzzer For Print Machine | MSPT14A40P7.6V12 | 14.0 * 7.0mm | 5Vp-p | 4000±500HZ | ≥80dB@10cm | ≤3mA | 1~25Vp-p | View detail » |
![]() | 9v 85db 4khz Piezoelectric Buzzer Ac Piezo Buzzer | MSPT17A | 17.0 * 7.5mm | 9Vp-p | 4000±500HZ | ≥85dB@10cm | ≤2mA | 1~30Vp-p | View detail » |
![]() | 9V 85dB Passive Electronic Piezoelectric Pin Piezo Buzzer | MSPT17C40P09 | 16.5 * 7.4mm | 9Vp-p | 4000±500HZ | ≥85dB@10cm | ≤2mA | 1~30Vp-p | View detail » |
![]() | 9V 4000Hz Piezo Passive Sounder Buzzer | MSPT17D40W55V9 | 16.5 * 4.0mm | 9Vp-p | 4000±500HZ | ≥82dB@10cm | ≤2mA | 1~30Vp-p | View detail » |
![]() | 9V 85dB 2048hz AC Piezoelectric Buzzer | MSPT17E | 17.1 * 9.0mm | 9Vp-p | 2048±500HZ | ≥85dB@10cm | ≤2mA | 3~20Vp-p | View detail » |
![]() | 9V 12V 85dB 4000Hz Passive Piezo External Buzzer With Pin | MSPT17G | 17.0 * 7.0mm | 9Vp-p | 4000±500HZ | ≥85dB@10cm | ≤3mA | 1~30Vp-p | View detail » |
![]() | 20mm*4mm 12V 80dB 3.5kHz ac buzzer with wires | ME20D04W20 | 20.0 * 4.2mm | 12Vp-p | 3500±500HZ | ≥80dB@10cm | ≤4mA | 3~20Vp-p | View detail » |
![]() | 9V 85dB 4000Hz Electric Piezo Transducer Buzzer | MSPT22A40P09 | 22.0 * 7.2mm | 9Vp-p | 4000±500HZ | ≥85dB@10cm | ≤2mA | 1~30Vp-p | View detail » |
![]() | 22mm*4mm external drive piezo transducer | MSPT22B30W25V12 | 21.7 * 4.0mm | 12Vp-p | 3000±500HZ | ≥85dB@10cm | ≤4mA | 3~30Vp-p | View detail » |
![]() | 3v 10v Passive Piezo Transducer for Remote Control | MSPT22C30P12.5V30 | 22.0 * 7.0mm | 5Vp-p | 3000±500HZ | ≥85dB@10cm | ≤5mA | 1~30Vp-p | View detail » |
![]() | 12V Ac Buzzer Piezo Transducer 85dB Piezo Actuator | MSPT22EA30W45V12 | 21.7 * 2.1mm | 12Vp-p | 3000±500Hz | ≥ 85dB@10cm | ≤4mA | 3~30Vp-p | View detail » |
![]() | 10v 75dB Passive Piezo Electronic Transducer | MSPT22F | 22.0 * 3.0mm | 10Vp-p | 1000±400HZ | ≥75dB@10cm | ≤3mA | 1~30Vp-p | View detail » |
![]() | 85db 12v 1300Hz ac piezo buzzer 30mm for light photocopier | MSPT30A35W100V12 | 30.0 * 5.4mm | 12Vp-p | 1300±500HZ | ≥85dB@10cm | ≤3.5mA | 1~40Vp-p | View detail » |
![]() | 30mm 110db Mini Low Current Passive Piezo Buzzer | MSPT30B32WC120V12 | 30.6 * 16mm | 12Vp-p | 3250±500Hz | ≥110dB@10cm | 1~40Vp-p | View detail » | |
![]() | 5V 80dB 4000Hz Passive Piezo Sounder Buzzer | MSPT30D45P20V10 | 30.0 * 10.0mm | 10Vp-p | 2500±500HZ | ≥85dB@10cm | ≤11mA | 1~24Vp-p | View detail » |
![]() | 110db 105dB 12v 3200Hz ac passive buzzer for Industry | MSPT30F32W100V12 | 30.6 * 16.0mm | 12Vp-p | 3200±500HZ | ≥110dB@10cm | ≤5mA | 1~40Vp-p | View detail » |
![]() | 12V 90dB Passive Piezo Buzzer For Home Application | MSPT35A16W100V12 | 34.3 * 9.0mm | 12Vp-p | 1600±500HZ | ≥90dB@10cm | ≤9mA | 3~30Vp-p | View detail » |
![]() | 24V 90dB Extermal Driven Micro Piezo Buzzer Polarity | MSPT52A20PV60 | 52.0 * 23.0mm | 18Vp-p | 2000~4000 | ≥90dB@10cm | ≤15mA | 3~60Vp-p | View detail » |
MANORSHI is a passive piezo buzzer manufacturer and supplier specializing in externally driven piezoelectric sounders and transducers for electronic equipment, household appliances, printers, communication devices and industrial applications.
Our passive piezo buzzer range includes compact pin-type buzzers, wire-lead piezo transducers and high-output external-drive sounders. Available products cover different dimensions, resonant frequencies, rated drive voltages and sound pressure levels to meet different electronic design requirements.
Unlike active piezo buzzers, passive piezoelectric sounders do not contain a built-in oscillation circuit. They require an external AC or pulse driving signal to generate sound. This design allows engineers to control the operating frequency, waveform and sound characteristics through the external driving circuit.
MANORSHI supplies passive piezo buzzers for OEM manufacturers, electronic component distributors, hardware developers and industrial equipment companies requiring reliable audible signaling components.
Request a QuoteRequest Samples
A passive piezo buzzer is an externally driven electroacoustic component that converts an alternating electrical signal into audible sound through the vibration of a piezoelectric ceramic element.
Unlike an active buzzer, a passive piezo buzzer does not have an integrated oscillator to generate its own preset tone. It requires an external signal source, such as a microcontroller, timer circuit or dedicated driver, to provide the required electrical waveform.
When an alternating voltage is applied to the piezoelectric element, the ceramic material expands and contracts according to the electrical signal. This mechanical vibration produces sound waves. The acoustic output depends on the driving frequency, voltage amplitude, waveform, mounting structure and resonant characteristics of the buzzer.
A typical passive piezo buzzer consists of the following components:
Piezoelectric Ceramic Element: Converts alternating electrical signals into mechanical vibration.
Metal Diaphragm: Supports the piezoelectric element and produces mechanical displacement.
Resonant Housing: Provides mechanical support and helps enhance acoustic output.
Electrical Terminals: Connect the transducer to the external driving circuit.
Passive piezo buzzers are suitable for electronic systems that require adjustable sound frequencies, multiple tones, programmable warning patterns or customized audible feedback.
A passive piezo buzzer operates through the inverse piezoelectric effect. When an alternating electrical voltage is applied to the piezoelectric ceramic element, the element changes its mechanical shape and produces vibration. These vibrations generate audible sound through the diaphragm and resonant housing.
The operating process typically involves the following steps:
An external controller generates an AC or periodic pulse signal.
The driving circuit applies the electrical waveform to the piezoelectric element.
The piezoelectric ceramic expands and contracts according to the applied signal.
The diaphragm vibrates and generates acoustic pressure waves.
The resonant housing enhances sound radiation and determines part of the acoustic response.
The frequency of the applied driving signal determines the primary sound frequency. The voltage amplitude, waveform and mechanical resonance influence the resulting sound pressure level.
When the driving frequency is close to the mechanical resonant frequency, the piezoelectric sounder can generally produce a stronger acoustic output. Actual performance also depends on the mounting method, enclosure design and electrical driving conditions.
Passive and active piezo buzzers both use piezoelectric elements to generate sound, but their internal circuit structures and driving requirements are different. Selecting the correct type is important for electronic circuit design and product performance.
| Comparison | Passive Piezo Buzzer | Active Piezo Buzzer |
|---|---|---|
| Internal Oscillator | No built-in oscillator | Built-in oscillator |
| Driving Method | External AC or pulse signal | DC power supply |
| Frequency Control | Controlled by the external driving circuit | Generally preset by the internal oscillator |
| Sound Patterns | Can support different tones and frequencies with suitable drive signals | Generally produces a preset tone or pattern |
| Circuit Requirements | Requires an external signal generator or driver | Requires a suitable DC switching circuit |
| Typical Applications | Programmable alarms, printers, electronic equipment and custom warning systems | Simple alarms, household appliances and fixed-tone indicators |
Choose a passive piezo buzzer when your product requires frequency control, multiple sound patterns or integration with a programmable audio circuit. Choose an active piezo buzzer when a simple fixed warning tone is sufficient and a built-in oscillator can simplify the circuit design.
Explore MANORSHI Active Piezo Buzzers >
MANORSHI offers passive piezoelectric buzzers and externally driven transducers in different dimensions, resonant frequencies and electrical configurations. The product range covers compact components for space-limited electronic devices and larger sounders for applications requiring higher acoustic output.
Available configurations include pin-type terminals and wire-lead designs. Selected models offer thin structures, low current consumption and different operating voltage ranges for integration into electronic products.
| Model | Dimension | Rated Drive Voltage | Frequency | SPL |
|---|---|---|---|---|
| MSPT13B48W30V12 | 13.0 × 2.5mm | 12Vp-p | 4800 ± 500Hz | ≥85dB @ 10cm |
| MSPT17A | 17.0 × 7.5mm | 9Vp-p | 4000 ± 500Hz | ≥85dB @ 10cm |
| MSPT17E | 17.1 × 9.0mm | 9Vp-p | 2048 ± 500Hz | ≥85dB @ 10cm |
| MSPT22F | 22.0 × 3.0mm | 10Vp-p | 1000 ± 400Hz | ≥75dB @ 10cm |
| MSPT30F32W100V12 | 30.6 × 16.0mm | 12Vp-p | 3200 ± 500Hz | ≥110dB @ 10cm |
| MSPT52A20PV60 | 52.0 × 23.0mm | 18Vp-p | 2000–4000Hz | ≥90dB @ 10cm |
The specifications above are selected examples from the MANORSHI product range. The rated drive voltage is expressed as peak-to-peak voltage (Vp-p), not as a DC power supply rating. Please consult the individual product datasheet for operating voltage, current consumption, capacitance and complete electrical specifications.
Sound pressure level measurements should be compared under equivalent driving voltage, frequency, waveform and measurement distance. Different test conditions can produce different acoustic results.
Get Passive Buzzer Specifications
Passive piezo buzzers are available in different sizes and terminal structures. The correct configuration depends on available installation space, PCB design, acoustic output requirements and electrical connection methods.
Miniature passive piezo buzzers are designed for compact electronic devices where installation space and power consumption are important considerations. Small-diameter models can be integrated into remote controls, handheld equipment, compact alarms and portable electronics.
Thin piezo transducers are suitable for products with limited vertical installation space. Their compact profile makes them useful in communication equipment, printers, compact control devices and other electronic products requiring a slim acoustic component.
Pin-type passive buzzers use electrical terminals designed for PCB mounting or through-hole installation. They are suitable for electronic control boards, household appliances, alarm systems and industrial electronic equipment.
Wire-lead piezo transducers provide flexible electrical connections for products where the sounder is installed separately from the main circuit board. They can be considered for printers, telephone equipment, control panels and compact electronic devices.
Larger passive piezo sounders can provide higher acoustic output when operated under their specified driving conditions. Selected MANORSHI models have published SPL ratings of 110dB at 10cm. These models are suitable for applications requiring a stronger audible warning signal, subject to the actual installation and test conditions.
A passive piezo buzzer requires an external driving circuit to generate the electrical waveform needed for sound production. The driving circuit may be implemented using a microcontroller, timer IC, oscillator or dedicated piezo driver.
For many applications, a square-wave signal is used to drive the piezoelectric element. The signal frequency, voltage amplitude and duty cycle should be selected according to the buzzer's rated specifications and desired acoustic output.
The driving frequency is one of the most important parameters affecting acoustic performance. For applications requiring high sound output, engineers commonly evaluate the signal near the specified resonant frequency of the piezo buzzer.
The resonant frequency is determined by the piezoelectric element and its mechanical structure. Mounting conditions and the product enclosure can also influence the actual acoustic response.
Vp-p means peak-to-peak voltage, which is the voltage difference between the maximum positive and negative levels of the driving waveform. It is commonly used to specify the drive voltage of passive piezoelectric transducers.
For example, a passive buzzer specified at 12Vp-p requires a suitable alternating waveform with the corresponding peak-to-peak voltage. This specification should not be interpreted as a 12V DC rated supply for an active buzzer.
The driving voltage must remain within the product's specified operating range. Excessive voltage can damage the piezoelectric element or reduce long-term reliability.
Square waves are commonly used in passive piezo buzzer drive circuits. A 50% duty-cycle square wave can be a useful starting point for evaluating acoustic output, while other waveforms and duty cycles may be selected for different tonal characteristics or system requirements.
The actual waveform should be evaluated according to the buzzer datasheet and the performance requirements of the finished equipment.
A piezoelectric transducer behaves largely as a capacitive electrical load. Its capacitance and operating frequency influence the current required from the external driver.
Engineers should check the specified capacitance, current consumption and driving conditions when selecting a transistor, MOSFET or dedicated driver IC. The controller's GPIO output may not be suitable for directly driving a transducer that requires higher voltage or current.
The mounting structure and enclosure can significantly affect the acoustic performance of a passive piezo buzzer. Mechanical contact, PCB dimensions, housing openings and resonant cavity design should be considered during product development.
For production designs, engineers should test the buzzer in the final enclosure rather than relying exclusively on measurements from an open test fixture.
Passive piezo buzzers are widely used in electronic products that require programmable audible feedback, warning signals or multiple sound patterns. Their external-drive structure provides flexibility for different circuit designs and operating requirements.
Printers, photocopiers and office equipment use passive piezo buzzers to provide user feedback, operating confirmation and error notifications. Compact wire-lead and pin-type models can be integrated into different equipment structures.
Washing machines, microwave ovens, air conditioners, refrigerators and kitchen appliances use audible indicators for timer alerts, operation feedback and warning functions. Passive piezo buzzers allow manufacturers to generate different tones through the main control circuit.
Telephones, communication devices and electronic terminals use compact piezoelectric sounders for ringing signals, key feedback and notification sounds. Small dimensions and low current requirements are important selection factors.
Security systems, electronic locks, monitoring devices and alarm controllers use passive piezo buzzers to generate warning tones and programmable audible signals. The external control circuit can adjust the sound pattern according to different system conditions.
Automotive electronic equipment can use passive piezo transducers for warning indicators, operation feedback and control notifications. Product selection should consider operating temperature, vibration, installation structure and the required sound output.
Industrial control panels, testing instruments and automated equipment use piezoelectric sounders to provide status notifications, fault warnings and user interaction feedback. External frequency control allows system designers to create different audible signals for different operating conditions.
Remote controls, timers, handheld electronic products and portable devices use compact passive piezo buzzers for audible feedback. Miniature dimensions and low power requirements make these components suitable for space-limited electronic designs.
Selecting the correct passive piezo buzzer requires evaluating the electrical drive signal, acoustic performance, mechanical dimensions and operating environment. The following parameters should be considered before confirming a model for production.
Check the rated peak-to-peak driving voltage and permitted operating voltage range. Ensure that the external driver can generate the required voltage waveform without exceeding the component's electrical limits.
The resonant frequency determines the frequency at which the buzzer is designed to produce its acoustic response. Select a model compatible with the available driving frequency and the required sound characteristics.
SPL measures the acoustic output of a buzzer and is expressed in decibels. Select the required sound output according to the application environment, background noise and audible warning distance.
Always compare SPL values under equivalent measurement distances, drive voltages and test conditions. A value measured at 10cm should not be directly compared with a value measured at 30cm or 1m.
Current consumption and capacitance affect the electrical loading of the external driver. These specifications should be checked when designing the power stage, particularly for battery-powered equipment and low-power electronic systems.
The diameter, height, terminal position and mounting structure must match the PCB layout and mechanical enclosure. Pin-type and wire-lead models are suitable for different installation configurations.
Operating temperature affects the suitability of a piezoelectric component for household, automotive and industrial environments. Confirm the specified operating and storage temperature ranges before selecting a model for the final application.
If the equipment requires different warning frequencies, intermittent beeps or customized sound patterns, a passive piezo buzzer provides flexibility through its external driving circuit. The controller must be capable of generating the required signal patterns.
Before mass production, evaluate the buzzer using the actual driving circuit and final mechanical enclosure. Check sound pressure, frequency response, current consumption and long-term operating performance under representative conditions.
MANORSHI supplies passive piezo buzzers and external-drive piezoelectric transducers for OEM equipment manufacturers, electronic component distributors and industrial product developers.
For OEM projects, component selection should be based on the required electrical drive conditions, acoustic output, dimensions and operating environment of the finished product.
Please provide the following information when requesting a quotation:
Required buzzer diameter and overall dimensions.
Rated drive voltage and operating voltage range.
Required resonant frequency or driving frequency.
Target sound pressure level and measurement distance.
Maximum current consumption and capacitance requirements.
Pin-type or wire-lead terminal configuration.
Operating temperature and installation conditions.
Sample quantity and estimated annual purchase volume.
Customers can request samples for electrical and acoustic testing before volume production. Our team can evaluate suitable models according to your technical specifications and project requirements.
For projects requiring special dimensions, terminal configurations or acoustic characteristics, please submit the technical drawing or reference sample for engineering evaluation. Customization feasibility, minimum order quantity and production lead time are subject to confirmation.
A passive piezo buzzer is an externally driven sound-generating component that uses a piezoelectric ceramic element to produce audible sound. It does not contain a built-in oscillator and requires an external AC or pulse signal to operate.
When an alternating electrical signal is applied to the piezoelectric element, the ceramic material expands and contracts, causing the diaphragm to vibrate. The resulting mechanical vibration produces audible sound through the resonant housing.
A passive piezo buzzer has no built-in oscillator and requires an external AC or pulse signal. An active piezo buzzer contains an internal oscillation circuit and generates a preset tone when the specified DC voltage is applied.
A passive piezo buzzer requires an alternating electrical signal to produce continuous sound. Applying a steady DC voltage alone does not generate continuous audible vibration. An external circuit must generate a suitable alternating or periodic waveform.
Yes. A passive piezo buzzer requires an external oscillator, microcontroller, timer or dedicated driver circuit to generate the required electrical signal. The external circuit controls the driving frequency and sound pattern.
Vp-p means peak-to-peak voltage, which is the difference between the maximum positive and negative voltage levels of a waveform. It is used to specify the drive voltage of a passive piezoelectric transducer and should not be confused with a DC supply voltage rating.
The recommended driving frequency depends on the buzzer's resonant frequency and the required acoustic output. For many applications, operating near the specified resonant frequency provides stronger sound output. Engineers should confirm the actual frequency response using the product datasheet and application test conditions.
Yes. A passive piezo buzzer can produce different tones by changing the frequency, waveform and timing of the external driving signal. This makes it suitable for programmable alarms, multiple warning patterns and electronic devices requiring customized audible feedback.
Resonant frequency is the natural mechanical frequency at which the piezoelectric sounder produces a strong acoustic response. The rated frequency is the frequency used under the specified test or operating conditions in the product datasheet. The exact relationship should be checked in the individual product specifications.
Sound pressure level depends on the piezoelectric element, resonant housing, driving voltage, frequency, waveform, mounting conditions and measurement distance. Actual sound output should be evaluated under the same conditions used in the product datasheet.
The terms are sometimes used interchangeably in component catalogs. A passive piezo buzzer or piezo sounder generally refers to an externally driven acoustic component with a resonant housing. Piezo transducer is a broader term describing a component that converts electrical energy into mechanical or acoustic energy.
Passive piezo buzzers are used in printers, photocopiers, household appliances, telephones, communication devices, electronic locks, security systems, industrial control panels and consumer electronic products requiring programmable audible signals.
Check the required dimensions, rated drive voltage, operating voltage range, resonant frequency, sound pressure level, current consumption, capacitance and mounting method. The selected buzzer must also be compatible with the external driving circuit and final product enclosure.
Yes. A microcontroller can generate a periodic waveform using a timer or PWM output. However, if the required drive voltage or current exceeds the controller's output capability, an external transistor, MOSFET or dedicated piezo driver circuit should be used.
Customers can contact MANORSHI to confirm sample availability and bulk supply options for selected models. For OEM projects, please provide the required electrical specifications, dimensions, estimated purchase quantity and application details for product evaluation.
Looking for a passive piezo buzzer manufacturer for your electronic equipment, printer, household appliance, alarm system or industrial control project?
MANORSHI supplies externally driven piezoelectric buzzers in different dimensions, resonant frequencies, drive voltage ranges and sound output configurations.
Send us your required dimensions, driving voltage, frequency, sound pressure level and estimated purchase quantity. Our team can help evaluate suitable models and confirm specifications, samples and bulk order arrangements.
Contact Us
Stay Connected