MNS-4CO-1000
Manorshi
14*16mm
1PPM
1.3V
70±20nA/ppm
<1.0A
≤30s
0-1000PPM
| Availability: | |
|---|---|
Product Description
This CO gas sensor uses three-electrode electrochemical sensing technology for carbon monoxide concentration measurement. It provides a linear signal output with fast response, good repeatability and stable long-term performance. The compact structure makes it suitable for integration into portable, fixed and OEM carbon monoxide detection equipment.
Three-electrode electrochemical sensing technology for reliable CO detection
High sensitivity with fast response and linear signal output
Good repeatability and long-term stability for continuous monitoring
Wide environmental adaptability for industrial applications
Compact structure for easy integration into gas detection equipment
Target Gas | Carbon Monoxide (CO) |
Detection Principle | Electrochemical |
Measurement Range | 0–1000 ppm |
Maximum Overload | 2000 ppm |
Sensitivity | 700 ± 20 nA/ppm |
Resolution | 1 ppm |
Response Time | <30 s |
Bias Voltage | 0 mV |
Output Characteristic | Linear |
Repeatability | <±2% |
Long-term Stability | <5% Signal Value/Year |
Operating Temperature | -20°C to +50°C |
Operating Pressure | 800–1200 mbar |
Operating Humidity | 15%–90% RH |
Storage Temperature | 0°C to +20°C |
Service Life | 2 Years |
Warranty Period | 1 Year |
Maximum Open-circuit Voltage | 1.3 V |
Maximum Short-circuit Current | <1.0 A |
Maximum Current at 2000 ppm | 0.3 mA |
Recommended Load Resistor | 10 Ω |
The MNS-4CO-1000 is designed to detect carbon monoxide, commonly abbreviated as CO.
It is a three-electrode electrochemical carbon monoxide gas sensor.
The specified measurement range is 0-1000 ppm.
The specified maximum overload concentration is 2000 ppm CO.
The nominal sensitivity is 700 ± 20 nA/ppm.
The sensor has a specified resolution of 1 ppm.
The specified response time is less than 30 seconds.
The specified bias voltage is 0 mV.
The sensor operates from -20°C to +50°C.
The specified operating humidity range is 15%-90% RH.
The specified service life is approximately 2 years under appropriate storage and operating conditions.
Yes. Like other electrochemical gas sensors, it can exhibit cross-sensitivity. In particular, the supplied test data shows a significant response to ethylene, while smaller responses are shown for hydrogen and nitric oxide.
Yes. Its compact Ø20 mm design, 1 ppm resolution and electrochemical sensing principle make it suitable for portable CO detectors and multi-gas safety instruments.
Yes. It is suitable for integration into OEM carbon monoxide detectors, industrial monitoring systems, ventilation control equipment and other gas detection products.
Contact Us
Stay Connected